Radio Settings — Acadiana Mesh Network Configuration
Use these settings to join the Acadiana Mesh network. These settings must match exactly for your device to communicate with other nodes in the network.
Radio Settings
Companion Device
| Setting | Value |
|---|---|
| Preset | USA/Canada (Recommended) |
| Frequency | 910.525 MHz |
| Bandwidth | 62.5 kHz |
| Spreading Factor | 9 |
| Coding Rate | 5 |
Repeater
| Setting | Value |
|---|---|
| Preset | USA/Canada (Recommended) |
| Frequency | 910.525 MHz |
| Bandwidth | 62.5 kHz |
| Spreading Factor | 9 |
| Coding Rate | 5 |
MQTT Observer Settings
| Setting | Value |
|---|---|
| Server | mqtt.acadianamesh.com |
| Port | 1883 |
| Username | Observer |
| Password | Uplink |
| IATA Code | LFT |
| Transport | TCP |
| Use TLS | No |
| Payload Mode | Packet (LetsMesh-compatible) |
Recommended Repeater CLI Settings
Once your repeater is online, apply these settings via the CLI:
set agc.reset.interval 500
set multi.acks 1
set advert.interval 240
set flood.advert.interval 29
set guest.password
set path.hash.mode 1
set loop.detect minimal
powersaving onRegion Settings
Acadiana Mesh uses the following region hierarchy:
gc
└── gc-la
└── gc-la-lftApply these region commands to your repeater:
region put gc
region put gc-la gc
region put gc-la-lft gc-la
region put gc-la-lft-mm gc-la
region allowf gc
region allowf gc-la
region allowf gc-la-lft
region allowf gc-la-lft-mm
region save